Open Loading

Muhr Open Loading

Open loading with MBO and MBO-T

For the opening loading of bulk goods into trucks, containers, railcars, ships, hoppers or stockpiles.

With open loading in particular, considerable experience is necessary for the conceptualization of the loading system. For the reliable and dust-free loading of coarse-bulk materials such as gravel and clinker, as well as for powdery products. With loading capacities of more than 1,000 m³/h and loading heights of up to 30 m and more.

Open loading
  • MBO

  • Perfectly adaptable
  • Low-wearing and economical
  • Dust-free and filter-protecting
Muhr MBO

Muhr

MBO

With exterior bellows for the open loading of powdery, granular and very dusty products.

   

Muhr MBO

Perfectly adaptable

The equipment of an MBO loading system is extremely variable:
Bellows, interior bellows, interior telescopic tube or wear protection cones made from various different materials and coatings, dust caps, internal and external filter units, etc. Thus, you can form an economical and efficient loading system for any application.

Muhr MBO

Low-wearing and economical

Internal components for product guidance as internal bellows or wear protection cones or telescopic tube made from standard steel, stainless steel or wear-resistant special steel reduce the wear. Together with other options such as the optional, simply replaceable and rotatable wear protection tube, this ensures long periods of operation and low operating costs.

Muhr MBO

Dust-free and filter-protecting

The dust development is effectively reduced as early as within the course of the loading process through the use of a special dust cap with "Energy Brake" or the Flow-Speed-Retarder FSR. In addition, a special supply air system on the dust cap ensures optimum efficiency for the exhaustion energy used.

  • MBO-T

  • Various different designs
  • Durable quality
  • Individually expandable

 

Muhr MBO-T

Muhr

MBO-T

With telescopic tubes for the open loading of coarse-bulk and low-dust products.

Various different designs

Individually adapted to the respective application, the telescopic tubes are made from standard steel, stainless steel or wear-resistant special steel.

Muhr MBO-T

Durable quality

As with all Muhr loading systems the MBO-T is also distinguished by its extremely solid and well thought out design. For maximum durability and reliable operation.

Muhr MBO-T

Individually expandable

With the help of numerous equipment options, such as various different dust caps or control system components, the MBO-T can be ideally adapted to suit your requirements.

Muhr MBO-T
  • Lifting Systems

  • Muhr electrical cable winch
  • Manual cable winch
Muhr Lifting Systems

Equipment module

Lifting Systems

Muhr bulk loading systems can be equipped with various different lifting systems for lifting and lowering the loading nozzle to suit the operating conditions:

Muhr electrical cable winch

Equipment module

Lifting Systems

Muhr electrical cable winch

Inlet head and electrical cable winch form a single unit: Slack-cable switch, lift limiters and main components of the winch unit are contained in a closed housing. For practical reasons, all electrical control elements are located together in a terminal box on the inlet head.

Manual cable winch

Equipment module

Lifting Systems

Manual cable winch

For manual operation of smaller loading systems with less frequent loading.

  • Flexible Section / Loading Bellows

  • Wide range of possibilities
  • Optimum adaptation

Equipment module

Flexible Section / Loading Bellows Chute

Flexible part in flexible designs for efficient solutions: Muhr loading systems can be equipped with various different flexible parts for lifting and lowering the loading nozzle to suit the operating conditions:

Flexible Section / Loading Bellows

Equipment module

Flexible Part /
Loading Bellows Chute

Wide range of possibilities

From single loading bellows, through double-bellows design, with wear protection cones or internal telescopic tubes, or even as telescopic tube alone, with or without pneumatic intermediate sealing - there is a wide range of options available.

Loading Bellows

Equipment module

Flexible Part /
Loading Bellows Chute

Optimum adaptation

Together with various different materials for the bellows, from PVC or neoprene/hypalon coated polyester fabric, through transparent PUR material, heat-resistant silicone glass fabric, bellows material with foodstuffs approval through to indestructible 2mm thick rubber fabric - it is therefore possible to adapt to the respective loading conditions.

Loading Bellows
Sealing Cone

Equipment module

Sealing Cone

The sealing cone seals the outlet of the loading nozzle after the end of the loading process. This prevents any product that may have adhered to the bellows falling out when the loading nozzle is lifted.

Equipment module

Vibrating Unit

The vibrating unit is fitted to the loading nozzle as an option and frees any bulk goods residue from the inside of the loading bellows after the loading process by means of vibration.

Vibrating Unit
Level Indicators

Equipment module

Level Indicators

Muhr loading systems can be equipped with a variety of different level indicators:

Rotary blade indicators, vibration probes, capacitive sensors, ultrasonic sensors, pneumatic sensors and bulk material motion detectors...

Muhr loading systems can be equipped with a level indicator through a specially developed system, whose measurement sensors can be arranged above the sealing cone rather than below as would be the case with conventional systems.

This enables the trigger point for the max. fill level to be set significantly higher, thus significantly increasing the fill height in the tank and also the usable volume. Secure and efficient.

  • Integrated Filter Unit IF

  • Compact & space-saving
  • Quick & simple to install
  • Reduce filter costs
  • High extraction performance

Equipment module

Integrated Filter Unit IF

Often it is not possible or economical to connect loading equipment to existing extraction systems.
In such cases the Muhr loading systems with integrated filter unit IF are the ideal and economical solution.

Integrated Filter Unit IF

Equipment module

Integrated Filter Unit IF

Compact & space-saving

With the Muhr loading systems with integrated filter unit IF and pneumatic filter cleaning, the inlet head, filter, compressed air tank, cleaning valve and cleaning control form a compact and space-saving unit.

Integrated Filter Unit IF

Equipment module

Integrated Filter Unit IF

Quick & simple to install

Muhr loading systems with integrated filter unit are quick and simple to install thanks to the compact design.

Integrated Filter Unit IF

Equipment module

Integrated Filter Unit IF

Reduce filter costs

A further advantage compared to external filter systems: Product that falls off the filter drops safely back into the loading flow as the filter is located directly inside the loading bellows of the loading system - cost-effective and safe!

Integrated Filter Unit IF

Equipment module

Integrated Filter Unit IF

High extraction performance

Muhr integrated filter units IF are available with filter areas of 3.5 m2 to 120 m2 and enable an extraction performance of up to 12,000 m3/h. Versions with tube filters are also available for products that are difficult to filter.

Integrated Filter Unit IF

Would you like to receive regular updates from Muhr?

To newsletter registration